Indicator Light
AD22
 
                  AD22
                Product Overview
- AD16, AD22 series pilot lamp only use LED lamp as the light source. The advantage have: long life, gentle weight, small, save energy. It is the advanced product of all kinds of the incandescence lamp and the neon lamp of the XD type.
- The cover of the lamp is made of PC material, and have good shock resistance. It can be used as indication pi lot light, accident signal and other signals in the circuits of such equipment as telecommunication.
Specifications
| Electrical Live | ≥30,000h | 
| Permitted Voltage | ±20%(≥110V) | 
| Dielectric Strength | 2.5kV(AC RMS),1min | 
| Frequency | 50~60Hz | 
| Rated Operating Current | ≥100cd/m2 | 
| Comparative Tracking Index | CT1≥100,flame retardant | 
| Insulation Resistance | Ui≤60V, 5MΩ; 60V<Ui≤660V, 50MΩ | 
| Light Color |  | 
Certificate

Diagramof Interior Connection
| Type | AC/DC Type Pilot Lamp | AC Type Pilot Lamp | AC/DC Type bi-color Lamp | AC Type bi-color Lamp | 
| Normal |  |  |  |  | 
| Anti-Interference |  |  |  |  | 
- AC/DC type pilot lamp is resistor step-down form; AC type pilot lamp is capacitor step-down form.
- When voltage is 110V or above it,The temperature of outer shell of AC/DC type pilot lamp is higher than AC type pilot lamp.
Order Code
 
              Attentions
- The frequency of AC type pilot lamp is 50~60Hz. If work in other frequency ranges, it will be broken .
- The common threshold value of anti-interference pilot lamp is below 40V; and if you need higher threshold value please tell us. We suggest that the threshold value shouldn't be too high. Please check the routing If the inter ference voltage is too high.
- Connection error is not allowable to AC type dual-color light, otherwise pilot lamp will be broken.
- Avoid using welding mode to connect lines as possible and you should using general plug (2.5×0.8mm) to connect and wear the protective sleeve. If you need to weld, please finish it in 3 seconds by the electric iron which is below 30W and don't exert external force on terminals .
Technical Data
22mm
| Shape | Number | Color | Voltage | Dimension | Remarks | 
|  Short Type | AD22-BS/△/▲ |  | AC/DC6V AC/DC12V AC/DC24V AC/DC36V AC/DC48V AC/DC110V AC/DC220V AC/DC380V AC110V AC220V AC380V |  | Screw Connection Electric Shock Protection | 
|  Short Type | AD22-DS/△/▲ |  |  | Screw Connection Electric Shock Protection | |
|  Short Type | AD22-ES/△/▲ |  |  | Screw Connection Electric Shock Protection | |
|  Short Type | AD22-HS/△/▲ |  |  | 220V and 380V are the special use for capacitor frame to leak electric. Screw Connection Electric Shock Protection | |
|  | AD22-B/△/▲/●/◎ |  |  | Screw Connection Electric Shock Protection Anti-Interference available | |
|  | AD22-D/△/▲/●/◎ |  |  | Screw Connection Electric Shock Protection Anti-Interference available | |
|  | AD22-E/△/▲/● |  |  | 220V and 380V are the special use for capacitor frame to leak electric. Screw Connection Electric Shock Protection Anti-Interference available | |
|  | AD22-H/△/▲/● |  |  | ||
|  Bi-Color | AD22-BI/△/▲/● |  |  | Screw Connection Electric Shock Protection Anti-Interference available | 
Disclaimer: The appearance of the products listed on this website, color, parameters are for reference only, issued a kind of LANGIR Electric Company shall prevail. 
LANGIR Electric Company reserves the right to modify or cancel the relevant parameters of this website does not advance notice. If in doubt, please contact customer service hotline.
            LANGIR Electric Company reserves the right to modify or cancel the relevant parameters of this website does not advance notice. If in doubt, please contact customer service hotline.


 86 (577) 62737672
 86 (577) 62737672 86 (577) 62737671
 86 (577) 62737671 sunshine@sunshinele.com
 sunshine@sunshinele.com


